> Products » Bridges and Structures » Plate » Aluminum Box Culvert
Register  |  Login

Aluminum Box Culvert

Aluminum Box CulvertPractical, Cost-Effective Solution for Small Bridge Replacement

Aluminum Box Culverts are a practical and cost-effective solution for small bridge replacement. The wide-span, low-rise shapes are lightweight as well as fast and easy to install. Spans to 35 feet.

Benefits of the Aluminum Box Culvert:

  • Buried Bridge Structure - Reduces maintenance costs and lowers life cycle costs as there are no bridge deck or joints at the deck/roadway interface.
  • Modular Bridge System - Rapid installation results in reduced overall project costs, delays and detours.
  • Designed “Site Specific” - Meets your site needs in full compliance with AASHTO, ASTM & AREMA design standards for highway and railway use.
  • Easy Site-Adaptability - Flexible layout options to fit within the right-of-way – curve the structure with a stream or adjust for vertical and horizontal clearance requirements.

To view documents simply click on (+) before the folder to view contents, then double click document file to open. Please note, not all folders contain documents.

Aluminum Box Culverts for Culverts, Canals and Ditchs

Aluminum Box CulvertAluminum Box Culverts offer wide-span, low-rise shapes that are lightweight as well as fast and easy to install.

Plate Bridges for Bridge Replacement

Bridge ReplacementPlate structures allow highway agencies and municipalities to dramatically reduce construction time and traffic disruptions when replacing our nation’s aging infrastructure. Plate bridges are ideally suited for emergency bridge replacements.

 

SS Credit 1 – Site Selection, 1 Point

Intent – Avoid the development of inappropriate sites and reduce the environmental impact from the location of a building.

Potential Contribution: Bridge and Structures

  • Long clear spans allow you to cross sensitive areas with little or no impact
  • Maintain a 50-foot buffer on either side of the waterway

SS Credit 2 – Development Density and Community Connectivity, 2-5 Points

Intent – Channel development to urban areas with existing infrastructure, protect greenfields and preserve habitat and natural resources.

Potential Contribution: Bridges and Structures
  • Connect people and services over roads, under rail crossings and across streams
  • Shorten walking distance to basic services
  • Provide aesthetic solutions

SS Credit 4.1 – Alternative Transportation, Public Transportation Access, 1-6 Points

Intent – Reduce pollution and land development impacts from automobile use.

Potential contribution: Bridges and Structures
  • Create bicycle trail connectivity - allowing alternative transportation mode
  • Create shorter, safer pedestrian access to public transit
  • Bring public transportation (i.e. railway) into a community with minimal impact to existing roads and grades

MR Credit 4 – Recycled Content, 1-2 Points

Intent – Increase the demand for building products that incorporate recycled content materials. The sum of post-consumer recycled content plus one-half of the pre-consumer content constitutes at least 10% (1 point) or 20% (2 points), based on cost, of the total value of the materials in the project.

Potential Contribution: CONTECH Metal Pipe and Structures
  • Steel is the most recycled material in the world
  • Up to 80% recycled content

MR Credit 5.1 – Regional Materials, 1-2 Points

Intent – Increase demand for building materials and products that are extracted and manufactured locally to a job site in hopes to reduce the environmental impact that would result from transporting these goods. Products manufactured, extracted and recycled within 500 miles of the project site for a minimum of 10% (1 point) or 20% (2 points), based on cost of the total materials value.

Potential Contribution: All CONTECH Products
  • 40 manufacturing facilities nationwide Contact your local representative to find out if your project location falls within our reach

 
For a list of all project profiles in your area, visit your local resource page.

Select your location to find your local resources and contact information.


Submit      

 

Aluminum Box Culvert Projects
 
 
           

Aluminum Box Culvert Resources

  Overview

  DYOB - Plate

  Design Guide

  Specification

WHY CHOOSE CONTECH?

Just ask our customers...
“Actually delivered earlier than expected!”
Leading West Coast General Engineering Contractor
©2012 Contech Engineered Solutions LLC (formerly CONTECH Construction Products) Sitemap | Conditions of Sale | Privacy Statement | Terms of Use