Register  |  Login
Professional Development Hours

Professional Development Series

The Professional Development Series is a unique chance to earn PDHs by reading specially focused, sponsored articles in CE News. By successfully participating, you may fulfill a portion of your continuing education requirements at no cost to you.

Other ways to earn PDH credits


Sign up or request a Seminar in your area, or request a Technical Presentation on site at your office. Learn more >>

Instructions

First, review the learning objectives, then read the Professional Development Series article. Next, complete the quiz and submit your answers. You will be redirected to the Continuing Education series on www.cenews.com to take the quiz online. Your quiz answers will be graded automatically.

If you answer at least 80 percent of the questions correctly, you can immediately download a certificate of completion and will be awarded 1.0 professional development hour (equivalent to 0.1 continuing education unit in most states).

If you prefer to submit the test via fax or mail, you may download the course to take the quiz. If you have questions or comments on specific courses, please contact us.

ZweigWhite is registered with the AIA Continuing Education System (CES) and is committed to developing quality learning activities in accordance with CES criteria. ZweigWhite is also registered with the Florida Board of Professional Engineers.

Note: It is the responsibility of the licensee to determine if this method of continuing education meets his or her governing board(s) of registration’s requirements.


Erosion Control

Geosynthetics in Articulating Concrete Block Section Design

August 2011:By Matthew Stovall, P.E.; and Barrie King, E.I.T.

Articulated Concrete Block Design

August 2010: By Bryan N. Scholl; Christopher I. Thornton, Ph.D., P.E.; and Barrie King, E.I.T.,

Overtopping Flow Protection

August 2009: By Bryan N. Scholl, Christopher I. Thornton, Ph.D., P.E., and Barrie King, E.I.T.,

Scour in Bottomless Culverts

December 2008: By Bryan N. Scholl and Christopher I. Thornton, Ph.D., P.E.,

Revetment Design Considerations in Sheltered Water Wave Conditions

October 2007: By Christopher I. Thornton, Ph.D., P.E. and Richard Kane,

Stormwater

Introduction to Infiltration Best Management Practices (BMP)

December 2011: By Vaikko Allen, CPSWQ, LEED-AP; Aimee Connerton LEED-AP; and Cory Carlson, P.E.

Cistern Design Considerations for Large Rainwater Harvesting Systems

September 2011: By Greg Kowalsky and Kathryn Thomason, P.E.,

Rainwater Harvesting and Re-Use:A Tool for Stormwater Runoff Reduction

September 2010: By Greg Kowalsky and Kathryn Thomason, P.E.,

Economic Optimization of Sustainable Subsurface Infiltration Systems

November 2009: By William G. Young, P.E.; Derek Berg; and Heather McCall, E.I.,

Designing For LID: An In-depth Look at Integrated Management Practices and Design Considerations

July 2009: By Jennifer Steffens, E.I., LEED-AP, and Denise Pinto, P.E.,

Stormwater Treatment and Onsite Infiltration- LID at the Core

August 2008: By Douglas E. Krause, P.E., and Vaikko P. Allen II, CPSWQ,

Evaluation of Stormwater Filtration Systems

May 2007: By James Lenhart, P.E.,

Designing Surface Water Runoff Controls for Paved Surfaces

December 2006: By Vanessa Hatcher, P.E., and Jim Noll, P.E.,

Bridges and Structures

Design Considerations for Pedestrian Truss Bridge Structures

October 2011: By James G. Bauer, Steven Herth, P.E., and Adam Homelvig, P.E.

Siting Considerations for Open-Bottom Buried Precast Concrete Bridge Structures

November 2010: By Julia Frazier, P.E.,

Practical Factors and Considerations Related to Culvert Inspection

July 2010: By Jim Noll, P.E. and Bob Frascella, P.E.,

Rehabilitation and Relining of Culverts

September 2008: By Jim Noll, P.E., and Matt Westrich, P.E.,

Culvert Hydraulics: Basic Principals

December 2007: By Philip A. Creamer, P.E.,

Flexible Pipes for Culvert and Drainage Applications: Understanding Design and Performance Differences

July 2007: By Jim Noll, P.E.,

Roadway and Earth Stabilization

Performance-Based Specifications for Roadways

October 2010: By Stephen Archer, P.E. and Daniel Priest, P.E.,

The Use of Geogrids in Railroad Applications

October 2009: By Jim Penman, CGeol, FGS, and Daniel J. Priest, P.E.,

Subgrade Improvement for Paved and Unpaved Surfaces Using Geogrids

October 2008: By Stephen Archer, P.E.,

Extending Flexible Pavement Life Using Geogrids

September 2006: By Jim Penman, CGeol, FGS, and Joe Cavanaugh, P.E.,

General Civil Engineering

LEED Green Building Rating System and Sustainable Sites

November 2008: By Steven Harrison, P.E., LEED AP and Jim Noll, P.E.,

Introduction to Decentralized Packaged Wastewater Treatment (PWWT) Systems

November 2011: By Andrew M. Jenkins, E.I.; and Daniel M. Early, P.E.